Motorcycle Plastic Parts Supplier
Home / Products / Injection Molding / Motorcycle Plastic Parts

OEM Motorcycle Plastic Parts Manufacturer in China

Kaidi's demonstrated motorcycle range includes sidecar canopy panels, a radiator cover and a rear-wheel cover in PC, ABS and PP.

Key Indicators

Fit across long mating edges; outdoor color stability; impact resistance; heat and splash exposure near the vehicle; controlled sink and waviness on visible panels; efficient packaging of large parts.

Kaidi Capacity

The tool review addresses wall transitions, rib layout, draft, attachment points and gate placement before mold build. Larger panels can be matched to Kaidi's press range, and visible components can continue to the in-house painting line when a validated coating system is specified.

Jiaxing Kaidi Technology Co., Ltd.
Jiaxing Kaidi Technology Co., Ltd.
ABOUT KD
ONE-STOP PLASTIC SOLUTION
Fast growing Motorcycle Plastic Parts manufacturer and OEM Motorcycle Plastic Parts factory in China. Established in 2007, covers an area of 52 acres, Factory area of 35,000 ㎡. The injection molding workshop and the spraying workshop employ a total of over 100 people, with more than 50% of them being professional technicians.

Specializing in plastic injection molding and surface spraying, including precision mold manufacturing and product assembly, and after-sales service. The products mainly include spare parts for automotive interiors and exterior trim, household appliances, office automation equipment and peripheral products, medical treatment, telecommunications equipment, robots, flight vehicles, and other products. The annual output value is approximately 90 million yuan.

Certificate Of Honor
NEWS AND BLOG
Motorcycle Plastic Parts Industry knowledge

Jiaxing Kaidi Technology Co., Ltd. is an OEM Motorcycle Plastic Parts manufacturer working from a 35,000 m² factory on a 52-acre site in Jiaxing, Zhejiang Province, China. Established in 2007, the company runs injection moulding and spray painting workshops with more than 100 employees, over half of them technicians, and links precision mould making, moulding, coating and finished-part assembly under one roof. A canopy panel or wheel cover therefore arrives as a painted, inspected component rather than a bare moulding that still needs three other suppliers.

Range and Application Fit

Our motorcycle range covers exterior bodywork and protective components for motorcycles and sidecar outfits, with material choice matched to the load each part actually carries.

  • Sidecar front canopy panel (PC): the forward-facing weathering surface, where transparency, impact resistance and UV stability matter more than stiffness.
  • Sidecar centre canopy panel (ABS): a structural infill panel with moulded-in colour, ribs and fixing points along long mating edges.
  • Sidecar rear canopy panel (PC): rear closure subject to stone throw, vibration and repeated washing.
  • Radiator cover (PP): louvred protection close to heat and road splash, where chemical resistance and toughness under vibration decide service life.
  • Rear wheel cover (PP): splash and debris shielding with large curved surfaces and mounting bosses.

The same tooling and moulding approach extends to other parts in this family — mudguards, side panels, chain guards, inner liners, battery and fuse-box covers — quoted from drawings, a reference sample or a scan of an existing part.

Material Selection Drives the Specification

Resin grade is settled before the mould is cut, because shrinkage, weld-line strength and paint adhesion all follow from that decision and are expensive to correct later.

Part Typical resin Performance demand Confirmed at tool review
Front canopy panel PC Impact strength, clarity, UV stability Gate position, flow path, ejector layout on visible face
Centre canopy panel ABS Stiffness, moulded colour, edge fit Rib layout, wall transitions, attachment points
Rear canopy panel PC Stone impact, vibration fatigue Draft, corner radii, fixing tolerance stack
Radiator cover PP Heat exposure, splash, chemical resistance Louvre thickness, warpage control, clip fit
Rear wheel cover PP Deflection under debris strike Boss geometry, sink control, mounting flatness

PC brings impact resistance and clarity to the front panel but needs UV-stabilised grades and careful drying; ABS gives a stiff, paint-friendly panel with good surface; PP stays tough near heat and splash but requires primer-assisted coating where a painted finish is specified.

Tool Review Before a Mould Is Cut

Every motorcycle part passes a tool review that addresses wall transitions, rib layout, draft, attachment points and gate placement. On long canopy panels the governing risks are warpage along the mating edge, sink opposite ribs and bosses, and ejector or gate marks landing on a painted or transparent surface.

  • Draft and parting-line placement checked against the visible surface
  • Rib-to-wall ratio reviewed to limit sink on Class-A faces
  • Gate position balanced for flow length and weld-line location
  • Mounting bosses and clip seats checked against the frame interface
  • Press size matched to the projected area of larger panels

Tooling is built in our own Mold Making / Tooling department, so steel corrections and sampling stay inside one project schedule instead of crossing a subcontractor.

Painting, Coating and Colour Control

Visible components continue to the in-house painting line when a validated coating system is specified — UV coating, matte or high-gloss finishes, and two-colour moulding where a moulded-in second colour removes a painting step. Colour is matched to an approved sample or a stated standard, and gloss level is agreed as a measured target rather than a verbal description.

Our Automotive & Motorcycle Painting line handles exterior trim finishing, with the coated part returning to assembly for hardware fitting and final packing.

Dimensional and Appearance Acceptance

Acceptance criteria are agreed before production: which dimensions are critical to fit, which surfaces are visible, and how colour and gloss are judged. First-off samples are measured in the measuring room using the workshop's measuring instruments, and the approved sample becomes the reference for the run.

  • Critical fit dimensions identified on the drawing, not the full model
  • Checking fixture or gauge agreed for long mating edges
  • Colour, gloss and texture judged against an approved master
  • Assembly trial on mating parts where the interface is supplied

Information We Use to Configure Your Solution

A workable quotation and tooling plan come from a small set of inputs. Where a drawing set is incomplete, a reference sample or scan of the current part is enough to start the tool review and identify what must be confirmed.

  • 3D model and 2D drawing with tolerances and datum scheme
  • Resin grade, or the performance requirement that governs the choice
  • Colour standard, gloss level and texture on visible surfaces
  • Annual volume, batch pattern and expected tool life
  • Mating parts, frame interface and assembly sequence
  • Marks, labelling, packaging and destination requirements
  • Any test or documentation package the project must carry

Tooling Maintenance, Spares and Delivery Scope

Moulds are serviced in our own mould maintenance workshop, and after-sales support and mould maintenance are part of the service scope rather than a separate arrangement. Wear items, inserts and replacement cavities can be planned with the tool so a running part is not held up by a single cavity.

Large painted panels are packed with edge protection and surface film, nested to limit movement in transit, and specified against the customer's handling and storage conditions. Assembly, hardware fitting and packing are completed before shipment, so the delivered scope matches what the line will receive.

Frequently Asked Questions

Which plastics do you use for motorcycle canopy panels and covers?

Our demonstrated range uses PC for front and rear sidecar canopy panels, ABS for the centre canopy panel and PP for the radiator cover and rear wheel cover. Selection is driven by impact demand, transparency, heat and splash exposure, and whether the part is painted or moulded in colour.

Can you supply painted parts matched to our colour standard?

Yes. Visible components can continue to our in-house painting line for UV coating, matte or high-gloss finishing, with colour matched to an approved master or a stated standard and gloss agreed as a measured target before the run starts.

What is needed to quote a new motorcycle plastic part?

A 3D model or 2D drawing with tolerances, the resin or performance requirement, colour and surface specification, annual volume and batch pattern, mating interfaces and packaging destination. A reference sample or scan can substitute where drawings do not exist.

How are large canopy panels protected during shipping?

Painted and transparent panels are given surface film and edge protection, nested to prevent movement and abrasion, then packed to the handling and storage conditions agreed for the destination.

Related Products and Categories

Our portfolio also includes Custom PC Motorcycle Sidecar Front Canopy Panel for applications with different operating ranges, interfaces or integration requirements.